ABS (Acrylonitrile Butadiene Styrene) | ABS

AN450R

AN450R is a Flame Retardant grade used for Injection Moulding(Flame rating VO) 

TYPICAL PROPERTIES

PROPERTYVALUEUNITTEST METHOD
MFI6g/10 minD1238, 200ºC, 10kg
NI (Izod)17kg-cm/cmD256, 1/4" at 23ºC
HDT75ºCD648, 1/4" at 18.6 kg/cm²
HDT84ºCD648, 1/4" at 4.6 kg/cm²
Flame RatingV-0 (1.6)Thickness : mmUL-94

APPLICATIONS

Injection Moulding

Compliance

Note: The properties of each grade are for Guidance only.  A specification can be agreed and sent upon request. 

GA300

GA300 is a Standard , very easy flow grade - used for high flow Injection.

TYPICAL PROPERTIES

PROPERTYVALUEUNITTEST METHOD
MFI30g/10 minD1238, 200ºC, 10kg
NI (Izod)22kg-cm/cmD256, 1/4" at 23ºC
HDT86ºCD648, 1/4" at 18.6 kg/cm²
HDT94ºCD648, 1/4" at 4.6 kg/cm²
Flame RatingHB (1.5)Thickness : mmUL-94

APPLICATIONS

Injection Moulding

Compliance

Note: The properties of each grade are for Guidance only.  A specification can be agreed and sent upon request. 

GA800

GA800 is a General Purpose Injection grade with good mechanical resistance and high Gloss

TYPICAL PROPERTIES

PROPERTYVALUEUNITTEST METHOD
MFI20g/10 minD1238, 200ºC, 10kg
NI (Izod)27kg-cm/cmD256, 1/4" at 23ºC
HDT87ºCD648, 1/4" at 18.6 kg/cm²
HDT96ºCD648, 1/4" at 4.6 kg/cm²
Flame RatingHB (1.5)Thickness : mmUL-94

APPLICATIONS

Injection Moulding

Compliance

Note: The properties of each grade are for Guidance only.  A specification can be agreed and sent upon request. 

KU901

KU901 is an Injection Grade with very high heat Resistance

TYPICAL PROPERTIES

PROPERTYVALUEUNITTEST METHOD
MFI6g/10 minD1238, 200ºC, 10kg
NI (Izod)13kg-cm/cmD256, 1/4" at 23ºC
HDT104ºCD648, 1/4" at 18.6 kg/cm²
HDT114ºCD648, 1/4" at 4.6 kg/cm²
Flame RatingHB (1.5)Thickness : mmUL-94

APPLICATIONS

Injection Moulding

Compliance

Note: The properties of each grade are for Guidance only.  A specification can be agreed and sent upon request. 

SP100

SP100 is a Standard grade with Very Good mechanical resistance and used for super high impact Injection.

TYPICAL PROPERTIES

PROPERTYVALUEUNITTEST METHOD
MFI18g/10 minD1238, 200ºC, 10kg
NI (Izod)34kg-cm/cmD256, 1/4" at 23ºC
HDT84ºCD648, 1/4" at 18.6 kg/cm²
HDT90ºCD648, 1/4" at 4.6 kg/cm²
Flame RatingHB (1.5)Thickness : mmUL-94

APPLICATIONS

Injection Moulding

Compliance

Note: The properties of each grade are for Guidance only.  A specification can be agreed and sent upon request. 

SP200

SP200 is used for super high impact Injection

TYPICAL PROPERTIES

PROPERTYVALUEUNITTEST METHOD
MFI17g/10 minD1238, 200ºC, 10kg
NI (Izod)36kg-cm/cmD256, 1/4" at 23ºC
HDT84ºCD648, 1/4" at 18.6 kg/cm²
HDT90ºCD648, 1/4" at 4.6 kg/cm²
Flame RatingHB (1.5)Thickness : mmUL-94

APPLICATIONS

Injection Moulding

Compliance

Note: The properties of each grade are for Guidance only.  A specification can be agreed and sent upon request. 

SR101

SR101 is a high impact Sheet Extrusion grade

TYPICAL PROPERTIES

PROPERTYVALUEUNITTEST METHOD
MFI7g/10 minD1238, 200ºC, 10kg
NI (Izod)30kg-cm/cmD256, 1/4" at 23ºC
HDT85ºCD648, 1/4" at 18.6 kg/cm²
HDT92ºCD648, 1/4" at 4.6 kg/cm²
Flame RatingHB (1.5)Thickness : mmUL-94

APPLICATIONS

Extrusion Sheet

Compliance

Note: The properties of each grade are for Guidance only.  A specification can be agreed and sent upon request.