SIS Rubber (Quintac) | Quintac

3270 (L)

TYPICAL PROPERTIES

PROPERTYVALUEUNITTEST METHOD
Polymer StructureLinear--
Styrene Content24% Abbe's refractmeter
SI Diblock Content67%Converted by Gel permeation chromatography
Solution Viscosity0.32Pa*sBrookfield Viscometer (25wt%, solids toluene solution at 25°C)
Melt Index20g/10min.ASTM D-1238 (G Condition)
Hardness34Shore AASTM D-2240
300% Modulus0.8MPaATSM D-638 (modified)
Tensile Strenght5MPaATSM D-638 (modified)
Elongation800%ATSM D-638 (modified)

APPLICATIONS

Product Safety

Quintac Thermoplastic Elastomers can accumulate electrostatic charges during unloading and transport which may cause flash fire when treated in presence of volatile or flammable materials. Ground all equipment and pour the product slowly into chute or vessel under inert gas. Avoid storing in wet or sunny conditions. Avoid ignition sources. Please contact us for further information and a copy of the Material Safety Data.

Compliance

Note: The properties of each grade are for Guidance only.  A specification can be agreed and sent upon request. 

3280 (L)

TYPICAL PROPERTIES

PROPERTYVALUEUNITTEST METHOD
Polymer StructureLinear--
Styrene Content25% Abbe's refractmeter
SI Diblock Content17%Converted by Gel permeation chromatography
Solution Viscosity0.38Pa*sBrookfield Viscometer (25wt%, solids toluene solution at 25°C)
Melt Index11g/10min.ASTM D-1238 (G Condition)
Hardness54Shore AASTM D-2240
300% Modulus1.8MPaATSM D-638 (modified)
Tensile Strenght23MPaATSM D-638 (modified)
Elongation1100%ATSM D-638 (modified)

APPLICATIONS

Product Safety

Quintac Thermoplastic Elastomers can accumulate electrostatic charges during unloading and transport which may cause flash fire when treated in presence of volatile or flammable materials. Ground all equipment and pour the product slowly into chute or vessel under inert gas. Avoid storing in wet or sunny conditions. Avoid ignition sources. Please contact us for further information and a copy of the Material Safety Data.

Compliance

Note: The properties of each grade are for Guidance only.  A specification can be agreed and sent upon request. 

3390 (A)

TYPICAL PROPERTIES

PROPERTYVALUEUNITTEST METHOD
Polymer StructureAsymmetric--
Styrene Content48% Abbe's refractmeter
SI Diblock Content-%Converted by Gel permeation chromatography
Solution Viscosity0.25Pa*sBrookfield Viscometer (25wt%, solids toluene solution at 25°C)
Melt Index14g/10min.ASTM D-1238 (G Condition)
Hardness65Shore AASTM D-2240
300% Modulus4MPaATSM D-638 (modified)
Tensile Strenght11MPaATSM D-638 (modified)
Elongation700%ATSM D-638 (modified)

APPLICATIONS

Product Safety

Quintac Thermoplastic Elastomers can accumulate electrostatic charges during unloading and transport which may cause flash fire when treated in presence of volatile or flammable materials. Ground all equipment and pour the product slowly into chute or vessel under inert gas. Avoid storing in wet or sunny conditions. Avoid ignition sources. Please contact us for further information and a copy of the Material Safety Data.

Compliance

Note: The properties of each grade are for Guidance only.  A specification can be agreed and sent upon request. 

3421 (L)

The Quintac 3421 is a standard grade for hot melt Pressure Sensitive Adhesives.

TYPICAL PROPERTIES

PROPERTYVALUEUNITTEST METHOD
Polymer StructureLinear--
Styrene Content14% Abbe's refractmeter
SI Diblock Content26%Converted by Gel permeation chromatography
Solution Viscosity1.4Pa*sBrookfield Viscometer (25wt%, solids toluene solution at 25°C)
Melt Index10g/10min.ASTM D-1238 (G Condition)
Hardness33Shore AASTM D-2240
300% Modulus0.8MPaATSM D-638 (modified)
Tensile Strenght19MPaATSM D-638 (modified)
Elongation1400%ATSM D-638 (modified)

Packaging & Storage

3421 is packaged in 20kgs 3 ply paper bags and it is supplied on shrink-wrapped pallets.

Product Safety

Quintac Thermoplastic Elastomers can accumulate electrostatic charges during unloading and transport which may cause flash fire when treated in presence of volatile or flammable materials. Ground all equipment and pour the product slowly into chute or vessel under inert gas. Avoid storing in wet or sunny conditions. Avoid ignition sources. Please contact us for further information and a copy of the Material Safety Data.

Compliance

Note: The properties of each grade are for Guidance only.  A specification can be agreed and sent upon request. 

3433N (L)

Quintac 3433N is a Linear (L) SIS rubber. It's a somewhat Special grade designed for Pressure Sensitive Adhesives to give high carton sealability.

TYPICAL PROPERTIES

PROPERTYVALUEUNITTEST METHOD
Polymer StructureLinear--
Styrene Content16% Abbe's refractmeter
SI Diblock Content56%Converted by Gel permeation chromatography
Solution Viscosity0.81Pa*sBrookfield Viscometer (25wt%, solids toluene solution at 25°C)
Melt Index12g/10min.ASTM D-1238 (G Condition)
Hardness31Shore AASTM D-2240
300% Modulus0.5MPaATSM D-638 (modified)
Tensile Strenght11MPaATSM D-638 (modified)
Elongation1500%ATSM D-638 (modified)

Product Safety

Quintac Thermoplastic Elastomers can accumulate electrostatic charges during unloading and transport which may cause flash fire when treated in presence of volatile or flammable materials. Ground all equipment and pour the product slowly into chute or vessel under inert gas. Avoid storing in wet or sunny conditions. Avoid ignition sources. Please contact us for further information and a copy of the Material Safety Data.

Compliance

Note: The properties of each grade are for Guidance only.  A specification can be agreed and sent upon request. 

3450 (R)

3450 is a Quintac grade suitable for Hot Melt Adhesives.

TYPICAL PROPERTIES

PROPERTYVALUEUNITTEST METHOD
Polymer StructureRadial--
Styrene Content19% Abbe's refractmeter
SI Diblock Content30%Converted by Gel permeation chromatography
Solution Viscosity0.55Pa*sBrookfield Viscometer (25wt%, solids toluene solution at 25°C)
Melt Index15g/10min.ASTM D-1238 (G Condition)
Hardness44Shore AASTM D-2240
300% Modulus1.4MPaATSM D-638 (modified)
Tensile Strenght13MPaATSM D-638 (modified)
Elongation1100%ATSM D-638 (modified)

Product Safety

Quintac Thermoplastic Elastomers can accumulate electrostatic charges during unloading and transport which may cause flash fire when treated in presence of volatile or flammable materials. Ground all equipment and pour the product slowly into chute or vessel under inert gas. Avoid storing in wet or sunny conditions. Avoid ignition sources. Please contact us for further information and a copy of the Material Safety Data.

Compliance

Note: The properties of each grade are for Guidance only.  A specification can be agreed and sent upon request. 

3460

3460 is a Quintac grade suitable for Hot Melt Adhesives.

TYPICAL PROPERTIES

PROPERTYVALUEUNITTEST METHOD
Styrene Content25% Abbe's refractmeter
SI Diblock Content-%Converted by Gel permeation chromatography
Solution Viscosity0.38Pa*sBrookfield Viscometer (25wt%, solids toluene solution at 25°C)
Melt Index11g/10min.ASTM D-1238 (G Condition)
Hardness55Shore AASTM D-2240
300% Modulus1.8MPaATSM D-638 (modified)
Tensile Strenght6MPaATSM D-638 (modified)
Elongation960%ATSM D-638 (modified)

Product Safety

Quintac Thermoplastic Elastomers can accumulate electrostatic charges during unloading and transport which may cause flash fire when treated in presence of volatile or flammable materials. Ground all equipment and pour the product slowly into chute or vessel under inert gas. Avoid storing in wet or sunny conditions. Avoid ignition sources. Please contact us for further information and a copy of the Material Safety Data.

Compliance

Note: The properties of each grade are for Guidance only.  A specification can be agreed and sent upon request. 

3520 (L)

3520 is a Quintac grade for Pressure Sensitive Adhesives where it provides high carton sealability.

TYPICAL PROPERTIES

PROPERTYVALUEUNITTEST METHOD
Polymer StructureLinear--
Styrene Content15% Abbe's refractmeter
SI Diblock Content78%Converted by Gel permeation chromatography
Solution Viscosity1.1Pa*sBrookfield Viscometer (25wt%, solids toluene solution at 25°C)
Melt Index7g/10min.ASTM D-1238 (G Condition)
Hardness21Shore AASTM D-2240
300% Modulus0.3MPaATSM D-638 (modified)
Tensile Strenght2MPaATSM D-638 (modified)
Elongation2000%ATSM D-638 (modified)

Product Safety

Quintac Thermoplastic Elastomers can accumulate electrostatic charges during unloading and transport which may cause flash fire when treated in presence of volatile or flammable materials. Ground all equipment and pour the product slowly into chute or vessel under inert gas. Avoid storing in wet or sunny conditions. Avoid ignition sources. Please contact us for further information and a copy of the Material Safety Data.

Compliance

Note: The properties of each grade are for Guidance only.  A specification can be agreed and sent upon request. 

3620 (H)

H = Hybrid Polymer Structure. The Quintac 3620 is a standard grade for hot melt Pressure Sensitive Adhesives.

TYPICAL PROPERTIES

PROPERTYVALUEUNITTEST METHOD
Polymer StructureHybrid (mix of Linear and Radial structure)--
Styrene Content14% Abbe's refractmeter
SI Diblock Content12%Converted by Gel permeation chromatography
Solution Viscosity1.5Pa*sBrookfield Viscometer (25wt%, solids toluene solution at 25°C)
Melt Index9g/10min.ASTM D-1238 (G Condition)
Hardness36Shore AASTM D-2240
300% Modulus0.9MPaATSM D-638 (modified)
Tensile Strenght24MPaATSM D-638 (modified)
Elongation1300%ATSM D-638 (modified)

Packaging & Storage

3620 is packaged in antistatic 500kgs bags.

Product Safety

Quintac Thermoplastic Elastomers can accumulate electrostatic charges during unloading and transport which may cause flash fire when treated in presence of volatile or flammable materials. Ground all equipment and pour the product slowly into chute or vessel under inert gas. Avoid storing in wet or sunny conditions. Avoid ignition sources. Please contact us for further information and a copy of the Material Safety Data.

Compliance

Note: The properties of each grade are for Guidance only.  A specification can be agreed and sent upon request. 

3620 Powder

The Quintac 3620 in Powder form is micronised 3620 and it is a is a grade suitable  for hot melt Pressure Sensitive Adhesives.

TYPICAL PROPERTIES

PROPERTYVALUEUNITTEST METHOD
Styrene Content14% Abbe's refractmeter
SI Diblock Content-%Converted by Gel permeation chromatography
Solution Viscosity1.5Pa*sBrookfield Viscometer (25wt%, solids toluene solution at 25°C)
Melt Index9g/10min.ASTM D-1238 (G Condition)
Hardness36Shore AASTM D-2240
300% Modulus0.9MPaATSM D-638 (modified)
Tensile Strenght24MPaATSM D-638 (modified)
Elongation1300%ATSM D-638 (modified)

Product Safety

Quintac Thermoplastic Elastomers can accumulate electrostatic charges during unloading and transport which may cause flash fire when treated in presence of volatile or flammable materials. Ground all equipment and pour the product slowly into chute or vessel under inert gas. Avoid storing in wet or sunny conditions. Avoid ignition sources. Please contact us for further information and a copy of the Material Safety Data.

Compliance

Note: The properties of each grade are for Guidance only.  A specification can be agreed and sent upon request. 

SL-165 (A)

TYPICAL PROPERTIES

PROPERTYVALUEUNITTEST METHOD
Polymer StructureAsymmetric--
Styrene Content30% Abbe's refractmeter
SI Diblock Content60%Converted by Gel permeation chromatography
Solution Viscosity-Pa*sBrookfield Viscometer (25wt%, solids toluene solution at 25°C)
Melt Index12g/10min.ASTM D-1238 (G Condition)
Hardness42Shore AASTM D-2240
300% Modulus-MPaATSM D-638 (modified)
Tensile Strenght-MPaATSM D-638 (modified)
Elongation-%ATSM D-638 (modified)

APPLICATIONS

Product Safety

Quintac Thermoplastic Elastomers can accumulate electrostatic charges during unloading and transport which may cause flash fire when treated in presence of volatile or flammable materials. Ground all equipment and pour the product slowly into chute or vessel under inert gas. Avoid storing in wet or sunny conditions. Avoid ignition sources. Please contact us for further information and a copy of the Material Safety Data.

Compliance

Note: The properties of each grade are for Guidance only.  A specification can be agreed and sent upon request.